The Stainless Steel Railing Round Fascia End Post Glass Clamps for Handrail is a piece of our Virginia Round Fascia glass railing system. Included in this item is one round, predrilled stainless steel post, one cone bracket and two round glass clamps.
- AISI 316 Stainless Steel, satin/brush finish
- Diameter of post: 1.67" (1 5/8")
- Post thickness: 3.6mm (.142")
- Glass clamp for 3/8" or 1/2" glass only
- Fascia Bracket Dimensions: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Note: Height is 36"/42" measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface.
Note: We define left/right side by the perspective of an observer standing on the ground looking up at the deck or balcony. Glass/clamps on the right is the “right” side post, and glass/clamps on the left is the “left” side post.
Note: The bottom of the post is unfinished. Some customers opt to purchase an end cap to cover the open tube.
Visit our showroom for a complete look at the Virginia Round system.
Installation PDF Installation YouTube Video
* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
*Top rail must be purchased separately. Inline Design stainless tubes are available here.
*Inline Design does not supply glass panels.