The Stainless Steel Railing Round Fascia Outside Corner Post Glass Clamps for Handrail is a piece of our Virginia Round Fascia glass railing system. Included in this item is one round, predrilled stainless steel post, one cone bracket and four round glass clamps, mounted at a 90º angle.
- AISI 316 Stainless Steel Satin/Brush finish
- Diameter of post: 1.67" (1 5/8")
- Post thickness: 2mm (5/64")
- Glass clamp for 3/8" or 1/2" glass only
- Fascia Bracket Dimensions: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Note: Height is 36" measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface.
Note: The bottom of the post is unfinished. Some customers opt to purchase an end cap to cover the open tube.
Visit our showroom for a complete look at the Virginia Round system.
Installation PDF Installation YouTube Video
* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
*Top rail must be purchased separately. Inline Design stainless tubes are available here.
*Inline Design does not supply glass panels.