The Stainless Steel Railing Square Fascia End Post Glass Clamps for Handrail is a piece of our Chicago Square Fascia glass railing system. Included in this item is one square, predrilled stainless steel post, one pyramid handrail bracket and two square glass clamps.
- AISI 316 Stainless Steel Satin/Brush finish
- Diameter of post: 1.57" x 1.57" (1 9/16" x 1 9/16")
- Post thickness: 2mm (5/64")
- Glass clamp for 3/8" or 1/2" glass only
- Fascia Bracket Dimensions: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)
Note: Height is 36" measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface.
Note: We define left/right side by the perspective of an observer standing on the ground looking up at the deck or balcony. Glass/clamps on the right is the “right” side post, and glass/clamps on the left is the “left” side post.
Note: The bottom of the post is unfinished. Some customers opt to purchase an end cap to cover the open tube.
Visit our showroom for a complete look at the Chicago Square system.
Installation PDF Installation YouTube Video
* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.
*Top rail must be purchased separately. Inline Design stainless tubes are available here.
*Inline Design does not supply glass panels.