The Cable Railing Press and Latch System Round Side Mount Inside Corner Post is a piece of our Press and Latch fascia cable railing system. Included in this item are 1 predrilled, stainless steel post, 10 terminals & 10 tensioners.

• AISI 316 Stainless Steel Satin/Brush finish
• Center to center cable distance: 3 1/8"
• Diameter of post: 1.67" (1 5/8")
• Thickness of post:Gauge 10 (3.6mm, .142") 
• 36" 10 terminals & 10 tensioners
• Fascia Bracket Dimensions: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness) 

Note: Height is 36" measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface. 

Note: The bottom of the post is unfinished.  Some customers opt to purchase an end cap to cover the open tube.

Visit our showroom for a complete look at the Press and Latch system. 

Installation instructions:

Installation PDF         

Installation YouTube Video

For engineering specifications: Press and Latch Specs

* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

*Top rail and cable must be purchased separately.