The Cable Railing Press and Latch System Square Side Mount Outside Corner Post is a piece of our press and latch fascia cable railing system. Included in this item is: 1 predrilled stainless steel post, 10/12 swageless terminals & 10/12 swageless tensioners, and 1 pyramid handrail bracket. 

• AISI 316 Stainless Steel Satin/Brush finish
• Center to center cable distance: 3 1/8"
• Post Dimensions: 1.57" x 1.57" (1 9/16" x 1 9/16")
• Post Thickness: Gauge 10 (3.6mm, .142")
• 36" 10 terminals & 10 tensioners
• 42" 12 terminals & 12 tensioners
• Fascia Bracket Dimensions: 3 5/8"(w) x 5 1/2" (h) x 3/8" (thickness)

Note: Height is 36"/42"  measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface. 

Note: The bottom of the post is unfinished.  Some customers opt to purchase an end cap to cover the open tube.

Technical Document:

  36" Assembly Drawing PDF.             Installation PDF   

  Installation YouTube Video                Press and Latch Specs

* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

* Cable and hand rail must be purchased separately.  Inline Design tubes are available here.