The Cable Railing Press and Latch System Square Side Mount Inside Corner Post is a piece of our press and latch fascia cable railing system. Included in this item are 1 predrilled, stainless steel post, 10/12 terminals & 10/12 tensioners, and 1 pyramid handrail bracket. 

• AISI 316 Stainless Steel Satin/Brush finish
• Center to center cable distance: 3 1/8"
• Diameter of post: 1.57" x 1.57" (1 9/16" x 1 9/16")
• Thickness of post: Gauge 10 (3.6mm, .142")
• 36" 10 terminals & 10 tensioners 
• Inside fascia bracket 

Note: Height is 36" measured from the floor to the top of Inline Design's round or square handrails. Side mounted posts are designed to be installed 1" below the edge of your surface. 

Note: The bottom of the post is unfinished.  Some customers opt to purchase an end cap to cover the open tube.

Check out our complete Press and Latch Cable Railing System.

Installation instructions:

Installation PDF          

Installation YouTube Video

For engineering specifications: Press and Latch Specs

* Due to the variety of floor surfaces, customers must supply the connecting hardware for the base, i.e. screws, bolts, anchor bolts, etc.

*Top rail and cable must be purchased separately.