Toggle Anchor Bolt Zinc Plating (M8 X 100MM)

Toggle Anchor Bolt Zinc Plating (M8 X 100MM)

Customer Reviews

No reviews have been written for this product.

Write your own review

The anchor is used to fasten our handrail brackets into a steel stud.

It's compatbile with the following handrail brackets:

The toggle anchor provides a secure hold from within steel stud 3/8" to 3-1/2" thick including gypsum board, drywall, and concrete block. The anchor come with a M8x1.25mmx100mm threaded metal bolt. The anchor meets Federal Specification FF-B-588-D for Type V anchors.

The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting steel stud;  when screwing in the anchor wings will lock in place behind the mounting steel stud. 


Was $3.00
Save $0.15 (5%)

SKU: TAB.0M8.100