Installing Stainless Steel Handrail Wall Bracket Event Horizon

  Download PDF Instructions

Overview

These instructions will provide step-by-step installation  guidelines for installing the Stainless Steel

Handrail Wall Bracket Event Horizon, HBWA.016 into sheetrock, wood, or drywall surfaces

This bracket comes with a round saddle adapter to attach to round tubing and 2x M5 screws to attach to a handrail

Brackets should be installed with a maximum distance of 4’

Caution: 

Wear protective ANSI approved safety glasses, working gloves and breathing mask at all times  

 


Tools Required

  1. Stud-finder
  2. Handheld drill
  3. Tape
  4. 1/8” drill bit
  5. [Not provided] 2x wall screw or bolt to fit 1/4” hole size

 

 

 

 

 

 

 

 

 


Instructions

  1. Using a stud-finder, locate a stud and spot drill using 1/8” drill bit (true for wood or steel/metal stud)
  2. Lift and tape flange base cover to expose the 1/4” screws on wall flange
  3. Position bracket at desired orientation; use selected wall mounting screws (not provided) to secure the bracket to the   mounting surface

                                             

  1. Refer to these instructions to install Inline Design square or round tubing and additional hardware     

          Note: If using a round handrail, position the round saddle adapter on top of the flat saddle before attaching handrails. 

NOTE: A small amount of surface corrosion is not uncommon after some exposure to weather or salty conditions; we recommend using our passivation solution or a stainless steel polish to prevent surface corrosion; more information available on our Engineering Specs Page